Structural Calculations
Lap & Development Length
Development and lap lengths of deformed bars for every bar size, 8 to 32 mm, to BNBC 2020 or ACI 318-19: tension, top bars, laps, compression and hooks.
Rod weight by diameter and length, a bar bending schedule with totals by diameter, and a cutting plan from 40 ft or 12 m bars with the least waste.
The tool gives a first answer. For a design solution for your own building or site, send your result and a few details to a Civilyst engineer.
Need more from this tool? Send the inputs you used and what you need. A Civilyst engineer reads every message.
Send feedbackA steel bar weighs d²/162 kg per metre with d in mm (the rule common on site; d²/162.2 is offered too): about 0.89 kg/m for a 12 mm bar and 1.58 kg/m for a 16 mm bar. The tool also makes a bar bending schedule with totals by diameter and a cutting plan from 40 ft or 12 m bars with the least waste.
Last updated · Maintained by Md. Mohaimanul Islam (Rifat), civil engineer
| Bar (mm) | kg per metre | kg per foot | kg per 40 ft bar |
|---|---|---|---|
| 8 | 0.395 | 0.120 | 4.82 |
| 10 | 0.617 | 0.188 | 7.53 |
| 12 | 0.889 | 0.271 | 10.84 |
| 16 | 1.580 | 0.482 | 19.27 |
| 20 | 2.469 | 0.753 | 30.10 |
| 22 | 2.988 | 0.911 | 36.43 |
| 25 | 3.858 | 1.176 | 47.04 |
| 28 | 4.840 | 1.475 | 59.00 |
| 32 | 6.321 | 1.927 | 77.07 |
A rod weight calculator and bar bending schedule (BBS). List the bars (mark, diameter, number and cut length in metres or feet) and get the weight of each line, the totals by diameter and the grand total in kg and tonnes. The cutting plan then shows how many 40 ft (or 12 m) bars to buy and how to cut each one, with the offcuts worth keeping and the scrap; bars longer than one length are lapped. A reference table gives the weight per metre, per foot and per 40 ft bar for 8 to 32 mm rods. The schedule and the plan download as a CSV file that opens in Excel.
| Symbol | Unit | Quantity | System |
|---|---|---|---|
| mm | millimetre | length | SI |
| m | metre | length | SI |
| rft | running foot | length | Imperial |
| kg | kilogram | mass | SI |
| t | tonne | mass | SI |
Structural Calculations
Development and lap lengths of deformed bars for every bar size, 8 to 32 mm, to BNBC 2020 or ACI 318-19: tension, top bars, laps, compression and hooks.
Estimation & BOQ
Concrete, steel bar by bar and formwork for a slab, beam, column, footing or stair, from the sizes on the drawing, with a bar schedule for Excel.
Estimation & BOQ
One bill of quantities for the whole job: add parts from the estimators, type your own rates, and download a PDF or an Excel file.