Estimation & BOQ
Rod Weight & BBS
Rod weight by diameter and length, a bar bending schedule with totals by diameter, and a cutting plan from 40 ft or 12 m bars with the least waste.
Development and lap lengths of deformed bars for every bar size, 8 to 32 mm, to BNBC 2020 or ACI 318-19: tension, top bars, laps, compression and hooks.
The tool gives a first answer. For a design solution for your own building or site, send your result and a few details to a Civilyst engineer.
Need more from this tool? Send the inputs you used and what you need. A Civilyst engineer reads every message.
Send feedbackA tension lap is the bar's development length times 1.0 (Class A) or 1.3 (Class B), and at least 300 mm; the development length depends on the bar size, concrete strength, steel grade, cover and spacing. The tool gives development and lap lengths for every bar from 8 to 32 mm, to BNBC 2020 or ACI 318-19, with every factor shown.
Last updated · Maintained by Md. Mohaimanul Islam (Rifat), civil engineer
Choose the code, the concrete strength f'c (in MPa or psi) and the steel's fy, and read the lengths for every bar size: straight bars in tension, top bars, tension laps (Class B or A), bars in compression and their laps, and standard hooks. Work them out by the code's table or from the actual cover and spacing; hooks and compression bars can take the reductions for side cover and ties. Each length is shown in mm (or feet and inches) and in bar diameters, and the table downloads for Excel.
Bangladesh National Building Code (BNBC) 2020
Part 6: Sec 8.2.3 (development length of deformed bars in tension) and the clauses that follow on hooks, compression bars and splices
ACI 318-19, Building Code Requirements for Structural Concrete
Chapter 25: 25.4.2, 25.4.3, 25.4.9, 25.5.2 and 25.5.5 · American Concrete Institute
ACI 318-08
Chapter 12: 12.2, 12.3, 12.5, 12.15 and 12.16 · American Concrete Institute
Estimation & BOQ
Rod weight by diameter and length, a bar bending schedule with totals by diameter, and a cutting plan from 40 ft or 12 m bars with the least waste.
Estimation & BOQ
Concrete, steel bar by bar and formwork for a slab, beam, column, footing or stair, from the sizes on the drawing, with a bar schedule for Excel.
Structural Calculations
The BNBC 2020 design response spectrum, seismic design category, building period and base shear for a site, with storey forces and a drift check.