Skip to content

Legal

Disclaimer

What Civilyst's tools are for, and what they are not: estimates to check against the codes and your own judgement, not a design or an approval.

Last updated 22 October 2026. Changes will be listed under What's new.

Civilyst's tools help you check, estimate and learn. They do not replace a qualified engineer, architect or surveyor, and they do not replace the published codes and rules.

1. Preliminary results only

  • Every result depends on your inputs and on the assumptions listed with the tool. Check both.
  • Quantity and cost results are estimates for planning. Real quantities depend on the drawings, the site and the workmanship; real costs depend on the market on the day you buy.
  • Design values (seismic, wind, soil) are for preliminary design and checking. The engineer of record must verify every value against the published code before using it.

2. Digitised maps and default values

The BNBC seismic zone lines and the wind map are digitised from the code's printed maps, so a site near a zone line or a wind contour can read differently from the printed figure. The everyday calculators start from typical default factors. Check such values against the printed code and your project's specification before using them in design.

3. Codes and rules change

Each tool names the code, rule or edition it follows. Codes, the building rules, the DAP and official rates are revised from time to time; a tool may lag behind a new gazette. Always check the current official version.

4. Approvals and inspections

The FAR Calculator estimates what a plot may allow; RAJUK or the relevant authority decides. The Handover Check is a guide for buyers, not a professional inspection or a legal document.

5. No professional relationship

Using the tools, or contacting us, does not create an engineer and client relationship. For advice on a real project, hire a qualified professional.

6. Feedback and updates

Use Feedback on the tool's page. A Civilyst engineer reads every message, and changes to the tools are listed under What's new.