Geotechnical Calculations
Site Class
Work out the BNBC 2020 site class (SA to SE, S1, S2) from a borehole log, using the top 30 m of soil.
Correct field SPT N to N60 and N1(60) for hammer energy, borehole, sampler, rod length and overburden, with every factor shown, and screen the layers for liquefaction.
The tool gives a first answer. For a design solution for your own building or site, send your result and a few details to a Civilyst engineer.
Need more from this tool? Send the inputs you used and what you need. A Civilyst engineer reads every message.
Send feedbackN60 is the field SPT blow count corrected for hammer energy (to 60 percent), borehole diameter, sampler and rod length; N1(60) also corrects it for the overburden pressure. Enter the field N and the test details and the tool shows every factor, layer by layer, and screens the layers for liquefaction.
Last updated · Maintained by Md. Mohaimanul Islam (Rifat), civil engineer
Enter the blow counts of a borehole (typed or pasted from Excel), the hammer and release, the borehole diameter and the sampler. The tool gives N60 and N1(60) at each depth, with the rod length factor, the effective stress and CN shown, and downloads the table as CSV. A liquefaction screening by BNBC Part 6 Sec 3.9.5 works out CSR at each depth, and FL where you give CRR.
Skempton, A. W. (1986)
Standard penetration test procedures and the effects in sands of overburden pressure, relative density, particle size, ageing and overconsolidation. Géotechnique 36(3).
Liao, S. S. C. and Whitman, R. V. (1986)
Overburden correction factors for SPT in sand. Journal of Geotechnical Engineering, ASCE, 112(3).
Seed, H. B., Tokimatsu, K., Harder, L. F. and Chung, R. M. (1985)
Influence of SPT procedures in soil liquefaction resistance evaluations. Journal of Geotechnical Engineering, ASCE, 111(12).
Geotechnical Calculations
Work out the BNBC 2020 site class (SA to SE, S1, S2) from a borehole log, using the top 30 m of soil.
Geotechnical Calculations
Drop a pin anywhere in Bangladesh to get its BNBC 2020 seismic zone and Z value, with a warning near zone lines.
Structural Calculations
The BNBC 2020 design response spectrum, seismic design category, building period and base shear for a site, with storey forces and a drift check.