Geotechnical Calculations
Seismic Zone
Drop a pin anywhere in Bangladesh to get its BNBC 2020 seismic zone and Z value, with a warning near zone lines.
Work out the BNBC 2020 site class (SA to SE, S1, S2) from a borehole log, using the top 30 m of soil.
The tool gives a first answer. For a design solution for your own building or site, send your result and a few details to a Civilyst engineer.
Need more from this tool? Send the inputs you used and what you need. A Civilyst engineer reads every message.
Send feedbackBNBC 2020 sets the site class (SA to SE, and S1 or S2 for special soils) from the average SPT N, shear wave velocity Vs or undrained shear strength Su over the top 30 m of soil (Table 6.2.13). Type the borehole log layer by layer and the tool averages it and gives the class, with every step shown.
Last updated · Maintained by Md. Mohaimanul Islam (Rifat), civil engineer
Enter the soil layers from a borehole log, or paste them from Excel, with SPT N, shear wave velocity Vs or undrained shear strength Su for each. The tool averages them over the top 30 m and gives the site class, with checks for the special profiles SE, S1 and S2.
| Symbol | Unit | Quantity | System |
|---|---|---|---|
| m | metre | length | SI |
Bangladesh National Building Code (BNBC) 2020
Part 6, Chapter 2: Sec 2.5.3.2, Table 6.2.13 and Eq. 6.2.31 to 6.2.33
Geotechnical Calculations
Drop a pin anywhere in Bangladesh to get its BNBC 2020 seismic zone and Z value, with a warning near zone lines.
Structural Calculations
The BNBC 2020 design response spectrum, seismic design category, building period and base shear for a site, with storey forces and a drift check.
Geotechnical Calculations
Correct field SPT N to N60 and N1(60) for hammer energy, borehole, sampler, rod length and overburden, with every factor shown, and screen the layers for liquefaction.